How do you connect the AS-UM2?

Plug the Ultimaker 2 power supply into the AS-UM2 3D Print Auto Shutoff unit.

Then plug the AS-UM2 3D Auto Shutoff unit into the Ultimaker 2.

Mount the AS-UM2 3D Print Auto Shutoff to the Ultimaker 2 front panel with the enclosed double sided tape.




How does the AS-UM2 work?

The AS-UM2 3D Print Auto Shutoff senses the power the Ultimaker 2 draws while printing.

When a 3D print is complete, pulsing to the filament heater stops.

The AS-UM2 3D Print Auto Shutoff senses this condition and enters a 5 minute shutoff countdown mode to keep cooling fans operational.

At the end of the countdown period, the AS-UM2 3D Print Auto Shutoff turns off power to the Ultimaker 2.

There are visual and audible alerts during the countdown period, and it can be canceled at any time.




What 3D Printers is the AS-UM2 compatible with?

The AS-UM2 3D Print Auto Shutoff works with Ultimaker 2 - NO MODIFICATION NECESSARY.

Contact us for other models and brands at sales@dcispec.com




How do you operate the AS-UM2 3D Print Auto Shutoff?

To turn On your Ultimaker 2- Press and Release the button on the AS-UM2 3D Print Auto Shutoff - LED turns on

To turn Off your Ultimaker 2- Press and Hold the button on the AS-UM2 3D Print Auto Shutoff until the LED turns off

When the Ultimaker 2 has finished a print, the AS-UM2 3D Print Auto Shutoff will enter auto shutoff mode. The LED will flash and the unit will beep for 5 minutes, after which the AS-UM2 3D Print Auto Shutoff will turn off the power to the Ultimaker 2

To Cancel auto shutoff mode, Press and Release the button on the AS-UM2 3D Print Auto Shutoff

(Some maintenance functions of the Ultimaker 2 trigger the auto shutdown mode, which can be cancelled by pressing and releasing the button on the AS-UM2 3D Print Auto Shutoff)